E-Mail
Toll Free: 800-225-2952
Special discounts and free shipping available on certain orders.
E-Mail
Toll Free: 800-225-2952
Special discounts and free shipping available on certain orders.
KEG Penetrating Nozzle Family:
High performance penetrating nozzles for total blockages caused by roots, grease or other impediments to flow,
choose one the KEG penetrating nozzles available in sizes from 1/4" to 1 1/4".
The Triple Edge Quattro nozzle is an excellent penetrating nozzle for a variety of applications. Deformed pipes, sand, mud, roots, trash, or other blockages inevitably yield to this high performance nozzle. The combination of four forward jets and sharp edges of the Triple Edge Quattro make it an ideal selection for total blockage removal.
Triple Edge Quattro nozzles have tier one and tier two efficiency ratings, are manufactured from hardened stainless steel, and are available with steel or titanium ceramic inserts.
The Drill Point Quattro is a terrific tool for removing total line blockages. The stainless steel drill tip penetrates the toughest clogs, particularly grease blockages. The 3 jets predrilled in the changeable tip then enlarge the opening in the clog, working with the sharp, tapered edges of the Drill Point Quattro.
The loosened debris is then washed down the line by the propulsion jets at the back of the Drill Point Quattro that provide excellent thrust. For low maintenance, high performance penetrating nozzle, the Drill Point Quattro is hard to beat. The Drill Point Quattro is classified as a Tier One or Tier Two nozzle depending on the size and the availability of replaceable inserts. Inserts are available in steel or titanium ceramic.
Penetrating Nozzles: Tier Two Efficiency
The Rambo Nozzle shares its name with a very "dangerous" warrior of the big screen. However, even the famous movie hero would be hard pressed to emulate the success this nozzle has in removing its "enemies". The Rambo nozzle combines the best characteristics of all penetrating nozzles into a maximum performance, maximum clog busting nozzle with its wedge-shaped design, drill point, and excellent thrust.
The Rambo Nozzle is sure to get you out of a jam at 2 A.M. when flow needs to be restored and clogs need to be eliminated. The Rambo can be configured with steel or titanium ceramic inserts.
Tier Three: Most Efficient & Most Powerful Fluid Mechanics, Longest Life Span
The Stallion Nozzle is a new Tier 3 Fluid Mechanics medium-sized nozzle excellent for storm drain or sewer cleaning applications where pipes are heavily exposed to debris, or where pipes are heavily damaged or weakened.
The Stallion is a fantastic flushing nozzle, however, due to the angle of the jets, the Stallion should not be used to clean large pipe walls.
The Stallion nozzle is ideal for flushing corrugated metal, concrete, clay, or plastic pipe.
The Tier Three design offers the ability to separate water coming into the nozzle and water coming from the nozzle. The shape and design offers a jet stream ideal for penetrating & flushing debris, or negotiating steep terrain. The Stallion Nozzle is available with titanium ceramic inserts only and has 6 rear jets at 12°.
Tier Three: Most Efficient & Most Powerful Fluid Mechanics, Longest Life Span
The OMG Nozzle is a new Tier 3 Fluid Mechanics large nozzle suitable for storm drain or sewer cleaning applications where pipe walls may be compromised and pressure on the pipe wall is not desired. The OMG is ideal for cleaning deteriorated pipe, corrugated metal pipe, or concrete pipe.
The OMG nozzle offers Superior performance in damaged or deteriorated pipe. The Tier Three design offers the ability to separate water coming into the nozzle and water coming from the nozzle. The large shape and design of the OMG provides optimal cleaning with minimal to no damage to the integrity of the pipe.
The OMG Nozzle is available with titanium ceramic inserts only and has 12 rear jets at 8° & 12°. Reducers can be added to adjust the hose connection size from 1.25" down to 1" or 3/4".
