For pricing info and quotes:
Toll Free: 800-225-2952 ⚫ E-Mail
Special discounts on pipe plugs are available.
Inflation Hose with Monitoring Gauge & Ball Valve (Release Valve):
Available in the following lengths:
- Part#: 125-10 (10 ft)
- Part#: 125-20 (20 ft)
- Part#: 125-30 (30 ft)
- Part#: 125-40 (40 ft)
Inflation Hose with Monitoring Gauge:
Available in the following lengths:
- Part#: 123-10 (10 ft)
- Part#: 123-20 (20 ft)
- Part#: 123-30 (30 ft)
- Part#: 123-40 (40 ft)
High Pressure Inflation Hose with Monitoring Gauge:
Available in the following lengths:
- Part#: 123-10HP (10 ft)
- Part#: 123-20HP (20 ft)
- Part#: 123-30HP (30 ft)
- Part#: 123-40HP (40 ft)
3/4" Inflation Hose with 1/4" Monitoring Hose:
Available in the following lengths:
- Part#: 119-20 (20 ft)
- Part#: 119-30 (30 ft)
- Part#: 119-40 (40 ft)
Pressure Relief Valves: Safety valves designed to prevent over-inflation
- Part#: 138-25 (1/4": 25 psi Safety Valve)
- Part#: 138-35 (1/4": 35 psi Safety Valve)
- Part#: 139-12 (1/2": 12 psi Safety Valve)
- Part#: 139-20 (1/2": 20 psi Safety Valve)
- Part#: 139-25 (1/2": 25 psi Safety Valve)
0-15psi Gauge:
Part#: 129-15
0-60psi Gauge:
Part#: 129-60
Gauge Block Assembly with Ball Valve 0-60 psi:
Part#: 125-1
Gauge Block Assembly 0-60 psi:
Part#: 123-1
0-30 PSI Vacuum Gauge - Center Back Connection:
Part#: 129-30CB
0-30 PSI Vacuum Gauge - Lower Connection:
Part#: 129-30L
Schrader Valve Inflation Fittings:
- 1/4" MPT Male Inflation Fitting:
Part#: 137-1
- 1/8" MPT Male Inflation Fitting:
Part#: 137-2
- Hose barb with male Schrader fitting:
Part#: 137-4
- Hose barb with female Schrader fitting:
Part#: 137-3
Quick Connect Set: 1/4" Quick Connect Coupler with Nipple:
Part#: 135-2
Telescopic Aluminum Remote Placement Pole with Pole Attachment:
Part#: 130-6
- Part#: 130-1 (1/2" Pole Attachment)
- Part#: 130-2 (5/8" Pole Attachment)
Air Acceptance Test Panel:
Part#: 1100-150
Plug Inflation Pressure 0-60 psi (0-4.1 bar)
Test Pressure 0-15 psi (0-1.0 bar)
Length: 23.0" (584 mm)
Width: 10.0" (254 mm)
Height: 10.0" (254 mm)
Weight: 17.0 lbs (7.7 kg)
Leak Location Reel:
Part#: 1100-300
Hose Length: 500.0' (152.4 m)
Plug Inflation Pressure: 0-60 psi (0-4.1 bar)
Test Pressure: 0-15 psi (0-1.0 bar)
Triple Hose for use with 1100-150 Test Panel:
- Part#: 1100-145-50 (3/8" x 3/8" x 1/4")
- Part#: 1100-150-50 (3/4" x 3/8" x 1/4")
Leak Location Space Hose (22 ft. length):
This hose is used to inflate two plugs simultaneously - The 600 series blocking plug and the 650 series air test plug
when performing segmented air-testing of the joints in the pipe. The hose connects between the two plugs in the pipe and
inflates them both simultaneously. The 600 series plug has an extra inflation port on the back for connecting the two plugs
Custom sizes are available upon request.
Part#: 126-22
3/8" Compressor Hose:
Available in the following lengths:
- Part#: 120-20 (20 ft)
- Part#: 120-30 (30 ft)
- Part#: 120-40 (40 ft)
3/4" Compressor Hose:
Available in the following lengths:
- Part#: 121-20 (20 ft)
- Part#: 121-30 (30 ft)
- Part#: 121-40 (40 ft)
1/4" Test Pressure Read Back Hose:
Available in the following lengths:
- Part#: 124-20 (20 ft)
- Part#: 124-30 (30 ft)
- Part#: 124-40 (40 ft)
Ported PVC Cap for Air Testing:
Quickly converts a plug with a bypass into an air testing plug. The cap just simply screws onto the end of
a male threaded bypass.
Custom configurations are available upon request.
3/4" Female Dixon compressor coupling:
Part#: 135-12F
3/4" Male Dixon compressor coupling:
Part#: 135-12M